Is natural latex good in Thailand’s heat and humidity?

The short answer: it can be, when the room and the bedding are right. Natural latex is moulded with pin holes, so air moves through the mattress. What makes a bed hot is mostly the body and the room, then the sheets and the protector between you and the latex. In the humid months mould comes from moisture, so the care is about keeping the bed dry.

Checked 15 November 2026

A wooden window pushed open onto palm fronds growing close outside.
The sun low in an orange haze over a wide city of roofs and towers.

We make natural latex mattresses in our workshop in Bangkok, and our customers sleep on them all over Thailand, from condos on Sukhumvit to houses on the islands. This is what we tell them about the heat and the damp.

What makes a bed feel hot

The first heat in a bed is your own. The body cools a little as it falls asleep, and sleep doctors advise a cool room to help it. In Bangkok that usually means a fan or the air-conditioner, more than any mattress.

The top of a slab of natural latex close up, round pin holes in even rows.

Next comes what lies between you and the mattress. Sheets of cotton or linen, in a light percale weave, are what sleep testers commonly suggest for warm sleepers; synthetic fabrics tend to hold more heat. The same goes for a mattress protector: choose a washable cotton one that lets air through.

The mattress comes last, and it matters most for one thing: whether air can move through it.

What our latex does in the heat

Our latex is moulded on long pins. They leave holes through the latex, so air moves through the mattress while you sleep. Along its length the latex is divided into seven comfort zones.

The corner of a stack of natural latex on a white table: the top slab pierced all over with pin holes, the cut edges of the slabs beneath it.

The quilted cover has organic cotton on the side you sleep on, with lyocell in the fabric, woven in Thailand. It is fixed to the mattress, so the sheet and the protector are what you wash.

Every depth stands on the same 15 cm block of medium latex. A deeper mattress adds soft latex on the side you sleep on, joined to that block with natural latex. If you sleep warm, tell us when you come to lie on them: you choose the depth by how you sleep, and lying down settles it. Each depth, layer by layer, is on the mattress page.

Our four depths, from the sleeping side down
DepthThe layers
15 cmOne block of medium latex, 80 kg/m³
20 cm5 cm of soft latex, 70 kg/m³, on 15 cm of medium, 80 kg/m³
25 cm10 cm of soft latex, 70 kg/m³, on 15 cm of medium, 80 kg/m³
30 cm15 cm of soft latex, 70 kg/m³, on 15 cm of medium, 80 kg/m³
A blue tuk-tuk parked in heavy rain on a Bangkok street, shop houses behind.

The humid months: keep the mattress dry

Mould grows where there is moisture, so the whole care of a mattress in Thailand is to keep it dry. Indoor air guidance puts the line at about 60% humidity, better between 30 and 50%. Bangkok’s air averages about 65% in the cool months and about 80% or more from June to November. So the air-conditioner or a dehumidifier does a work no mattress can do on its own.

Natural latex is commonly described as resistant to dust mites and mould. No mattress is immune: what keeps a bed clean in this climate is a dry room, a protector and bedding washed often. Dust mites have a guide of their own.

The bed through the Thai year
SeasonMonthsFor the bed
HotMid-February to mid-MayLight cotton sheets; the fan or air-conditioner on at night
RainyMid-May to mid-OctoberWash the protector more often; dry the room
CoolMid-October to mid-FebruaryThe driest months in Bangkok: strip the bed and air it for a day

Seven habits through the year

  1. Put a washable cotton protector on the mattress

    It keeps sweat and spills off the cover, and it is the first thing to wash.

  2. Wash the protector and the sheets often

    And more often in the rainy months.

  3. Air the bed

    Take the sheets off for a few hours now and then, and open the window or run the air-conditioner.

  4. Give it a flat, firm base

    A flat surface, not slats: a board over the slats if your bed has them. The air moves through the latex by its pin holes; on a solid base or the floor, lift the mattress now and then in the rainy months to air the underside (what to put under it).

  5. Keep it out of direct sunlight, even to dry it

    Many homes here put a mattress out in the sun; do not do it with latex, because sunlight slowly makes it brittle.

  6. Keep it away from heat

    No heating pad or electric blanket on the latex.

  7. Never soak it

    Water that goes deep into the latex is slow to come out.

A ceiling fan with five wooden blades under the beams of a timber roof.

By the sea and on the islands

Many of our customers live by the sea and on the islands, and we deliver all over Thailand, islands included. The sea air is damp all year, and on the islands of the Gulf the heaviest rain comes later than in Bangkok, from about October to December.

Heavy grey clouds over a bay: limestone headlands, a village among trees on the shore.

The same habits hold, only more often: a protector, a dry room, air under the bed. A house closed for weeks while you are away keeps its damp: when you come back, open it up, take the sheets off and let the bed air before you sleep on it.

If you find a spot or a smell

Blot a spill at once with a clean cloth; do not rub it. Then dab it with a cloth wrung out in cool water with a drop of mild soap, and let the mattress dry in a shaded, airy room. No bleach or strong products on the latex.

Questions we are often asked

Is a latex mattress hot?

Natural latex is moulded with pin holes, so air moves through it. Whether a bed feels hot depends first on the room and on what lies on the mattress: cotton sheets, a cotton protector and a cool room do most of the work.

Is natural latex good in a hot and humid climate?

Yes, if it is kept dry. Air moves through the pin holes; the room, a protector and bedding washed often keep moisture out. That is how our customers sleep on it in Bangkok and on the islands.

How do I stop mould on a mattress in Thailand?

Keep it dry: run the air-conditioner or a dehumidifier, use a washable cotton protector, leave air under the bed, and never soak the mattress or dry it in the sun.

Can I put a latex mattress in the sun to dry it?

No. Sunlight slowly makes latex brittle. Air it in the shade, in a room with the window open or the air-conditioner on.

Which depth is best in the heat?

Every depth stands on the same perforated block of medium latex; the deeper ones add soft latex on the side you sleep on. Choose by how you sleep, lying on them, and tell us if you sleep warm.

Do you deliver to the islands?

Yes. We deliver all over Thailand, islands included. Tell us where you live and we tell you how it works for your place.

How long does a latex mattress last in this climate?

Our latex carries a 10-year warranty from the day you receive the mattress. A customer still sleeps on a King and a Queen he bought from us more than twelve years ago.

Come and lie on the 15 and the 25 cm side by side in our showroom, inside the workshop in Prawet, Bangkok: Monday to Saturday, by appointment. Or ask on WhatsApp, +66 89 108 8889 (English, French) or +66 83 980 5623 (English, French, Thai).

Tell us a day that suits you 

Natural Living Concept, Bangkok.

First published 15 November 2026. Checked 15 November 2026.

If you have a question, call +66 89 108 8889, or write to us on WhatsApp.

Read next

Read on

How do you care for a natural latex mattress?

A flat surface, no direct sun, a washable protector, a closed cover, and four steps for a stain.

Come and lie on one

The showroom is inside our workshop in Prawet, Bangkok. Tell us a day that suits you and we confirm the time.

322 Soi 16, Pattanakarn 61
Prawet, Bangkok 10250

Directions (opens in a new tab) 

  • Monday to Friday, 9:00 to 18:00
  • Saturday, 9:00 to 17:00

Monday to Friday, 9:00 to 18:00; Saturday, 9:00 to 17:00

Arrange a visit
© OpenStreetMap contributors (opens in a new tab)